Stems
Refine Search
Lightweight 3D forged 6061 aluminum stem
T6 heat treatment to maximize strength
O..
Lightweight 3D forged 6061 aluminum stem
T6 heat treatment to maximize strength
O..
Quick adjustment with an open and close lever (no tools)
Made from aluminum
Adjus..
Quick adjustment with an open and close lever (no tools)
Made from aluminum
Adjus..
Height-adjustable stem mountFor 1 1/8" threadless stems and 1 1/8" steel or alloy steer tubesNo spec..
Height-adjustable stem mountFor 1 1/8" threadless stems and 1 1/8" steel or alloy steer tubesNo spec..
Angle adjustable from 0-70 degreesWith reinforced nylon QR25.4 mm diameter, 180 mm shaft lengthAlumi..
Angle adjustable from 0-70 degreesWith reinforced nylon QR25.4 mm diameter, 180 mm shaft lengthAlumi..
Aluminum360 degree rise or lower adjustment Stem length will be extended by 45 mmHolds handlebars wi..
Aluminum360 degree rise or lower adjustment Stem length will be extended by 45 mmHolds handlebars wi..
Alloy 3D forged Adjustable from 0-60 degreesFor 1 1/8" steerer tube; 125 mm in lengthFour bolt clamp..
Alloy 3D forged Adjustable from 0-60 degreesFor 1 1/8" steerer tube; 125 mm in lengthFour bolt clamp..
Alloy 3D forged Adjustable from 0-60 degrees For 1 1/8" steerer tube; 125 mm in length Four-bolt cla..
Alloy 3D forged Adjustable from 0-60 degrees For 1 1/8" steerer tube; 125 mm in length Four-bolt cla..
Alloy 3D forged
Adjustable from 0-60 degrees
For 1 1/8" steerer tube; 120 mm in l..
Alloy 3D forged
Adjustable from 0-60 degrees
For 1 1/8" steerer tube; 120 mm in l..
Alloy 3D forged Adjustable from 0-60 degreesFor 1 1/8" steerer tube; 105 mm in lengthFour-bolt clamp..
Alloy 3D forged Adjustable from 0-60 degreesFor 1 1/8" steerer tube; 105 mm in lengthFour-bolt clamp..
Alloy Height-adjustable For 1 1/8" threadless stemsCan add up to 117 mmIn Satori blister packagingTh..
Alloy Height-adjustable For 1 1/8" threadless stemsCan add up to 117 mmIn Satori blister packagingTh..
AlloyFits 25.4mm stems & 22.2mm (with adapter)Adjustable from 0 to 50 degreesGraduated markings to a..
AlloyFits 25.4mm stems & 22.2mm (with adapter)Adjustable from 0 to 50 degreesGraduated markings to a..
AlloyFits 25.4mm stems & 22.2mm (with adapter)Adjustable from 0 to 50 degreesGraduated markings to a..
AlloyFits 25.4mm stems & 22.2mm (with adapter)Adjustable from 0 to 50 degreesGraduated markings to a..
Aluminum construction65 mm of adjustabilityFor 1 1/8" threadless stemsTwo-bolt clampIncludes 4 narro..
Aluminum construction65 mm of adjustabilityFor 1 1/8" threadless stemsTwo-bolt clampIncludes 4 narro..
Alloy Height-adjustable For 1 1/8" threadless stemsCan add up to 117 mmIn Satori blister packagingTh..
Alloy Height-adjustable For 1 1/8" threadless stemsCan add up to 117 mmIn Satori blister packagingTh..
Aluminum construction65 mm of adjustabilityFor 1 1/8" threadless stemsTwo-bolt clampIncludes 4 narro..
Aluminum construction65 mm of adjustabilityFor 1 1/8" threadless stemsTwo-bolt clampIncludes 4 narro..
Clamp for Affix ANCOR stem and handlebar comboCNC-machinedMade from aluminumOnly 44 gramsAnodized pu..
Clamp for Affix ANCOR stem and handlebar comboCNC-machinedMade from aluminumOnly 44 gramsAnodized pu..
Clamp for Affix ANCOR stem and handlebar comboCNC-machinedMade from aluminumOnly 44 gramsRaw silver ..
Clamp for Affix ANCOR stem and handlebar comboCNC-machinedMade from aluminumOnly 44 gramsRaw silver ..
Angle adjustable 40°-140°Aluminum constructionStem length 85 mm31.8 mm bar clamp diameterIn OEM pack..
Angle adjustable 40°-140°Aluminum constructionStem length 85 mm31.8 mm bar clamp diameterIn OEM pack..
30 degree angle, for 1 1/8" 50 mm in lengthAluminum constructionMatte black in colorOEM packagingThe..
30 degree angle, for 1 1/8" 50 mm in lengthAluminum constructionMatte black in colorOEM packagingThe..
90 mm wide for a 1.1/8 inchFor 31.8 mm clamp7 degree rise3D Forged Aluminum6 Anodized colors and sol..
90 mm wide for a 1.1/8 inchFor 31.8 mm clamp7 degree rise3D Forged Aluminum6 Anodized colors and sol..
90 mm wide for a 1.1/8 inch
For 31.8 mm clamp
7 degree rise
3D Forged Alumi..
90 mm wide for a 1.1/8 inch
For 31.8 mm clamp
7 degree rise
3D Forged Alumi..
90 mm wide for a 1.1/8 inch
For 31.8 mm clamp
7 degree rise
3D Forged Alumi..
90 mm wide for a 1.1/8 inch
For 31.8 mm clamp
7 degree rise
3D Forged Alumi..
90 mm wide for a 1.1/8 inch
For 31.8 mm clamp
7 degree rise
3D Forged Alumi..
90 mm wide for a 1.1/8 inch
For 31.8 mm clamp
7 degree rise
3D Forged Alumi..
90 mm wide for a 1.1/8 inch
For 31.8 mm clamp
7 degree rise
3D Forged Alumi..
90 mm wide for a 1.1/8 inch
For 31.8 mm clamp
7 degree rise
3D Forged Alumi..
90 mm wide for a 1.1/8 inch
For 31.8 mm clamp
7 degree rise
3D Forged Alumi..
90 mm wide for a 1.1/8 inch
For 31.8 mm clamp
7 degree rise
3D Forged Alumi..
110 mm wide for a 1.1/8 inchFor 31.8 mm clamp7 degree rise3D Forged Aluminum6 Anodized colors and so..
110 mm wide for a 1.1/8 inchFor 31.8 mm clamp7 degree rise3D Forged Aluminum6 Anodized colors and so..
110 mm wide for a 1.1/8 inch
For 31.8 mm clamp
7 degree rise
3D Forged Alum..
110 mm wide for a 1.1/8 inch
For 31.8 mm clamp
7 degree rise
3D Forged Alum..
110 mm wide for a 1.1/8 inch
For 31.8 mm clamp
7 degree rise
3D Forged Alum..
110 mm wide for a 1.1/8 inch
For 31.8 mm clamp
7 degree rise
3D Forged Alum..
110 mm wide for a 1.1/8 inch
For 31.8 mm clamp
7 degree rise
3D Forged Alum..
110 mm wide for a 1.1/8 inch
For 31.8 mm clamp
7 degree rise
3D Forged Alum..
110 mm wide for a 1.1/8 inch
For 31.8 mm clamp
7 degree rise
3D Forged Alum..
110 mm wide for a 1.1/8 inch
For 31.8 mm clamp
7 degree rise
3D Forged Alum..
110 mm wide for a 1.1/8 inch
For 31.8 mm clamp
7 degree rise
3D Forged Alum..
110 mm wide for a 1.1/8 inch
For 31.8 mm clamp
7 degree rise
3D Forged Alum..
100 mm wide for a 1.1/8 inchFor 31.8 mm clamp7 degree rise3D Forged Aluminum6 Anodized colors and so..
100 mm wide for a 1.1/8 inchFor 31.8 mm clamp7 degree rise3D Forged Aluminum6 Anodized colors and so..
100 mm wide for a 1.1/8 inch
For 31.8 mm clamp
7 degree rise
3D Forged Alum..
100 mm wide for a 1.1/8 inch
For 31.8 mm clamp
7 degree rise
3D Forged Alum..
100 mm wide for a 1.1/8 inch
For 31.8 mm clamp
7 degree rise
3D Forged Alum..
100 mm wide for a 1.1/8 inch
For 31.8 mm clamp
7 degree rise
3D Forged Alum..
100 mm wide for a 1.1/8 inch
For 31.8 mm clamp
7 degree rise
3D Forged Alum..
100 mm wide for a 1.1/8 inch
For 31.8 mm clamp
7 degree rise
3D Forged Alum..
100 mm wide for a 1.1/8 inch
For 31.8 mm clamp
7 degree rise
3D Forged Alum..
100 mm wide for a 1.1/8 inch
For 31.8 mm clamp
7 degree rise
3D Forged Alum..
100 mm wide for a 1.1/8 inch
For 31.8 mm clamp
7 degree rise
3D Forged Alum..
100 mm wide for a 1.1/8 inch
For 31.8 mm clamp
7 degree rise
3D Forged Alum..
Alloy constructionFor 1 1/8" steerer tube7 degrees of rise, 90 mm in length For 25.4 mm handlebars M..
Alloy constructionFor 1 1/8" steerer tube7 degrees of rise, 90 mm in length For 25.4 mm handlebars M..
Alloy constructionFor 1 1/8" steerer tube7 degrees of rise, 90 mm in length For 25.4 mm handlebars M..
Alloy constructionFor 1 1/8" steerer tube7 degrees of rise, 90 mm in length For 25.4 mm handlebars M..
Alloy construction For 1 1/8" steerer tube15 degrees of rise; 90 mm in lengthFor 31.8 mm oversize ha..
Alloy construction For 1 1/8" steerer tube15 degrees of rise; 90 mm in lengthFor 31.8 mm oversize ha..
Alloy construction For 1" (22.2 mm) steerer tube36 mm in length Chrome plated steel shaft; 145 mm in..
Alloy construction For 1" (22.2 mm) steerer tube36 mm in length Chrome plated steel shaft; 145 mm in..
Alloy constructionAhead stem for 1 1/8" steerer tube50 mm in length, 30 mm in heighth Four-bolt clam..
Alloy constructionAhead stem for 1 1/8" steerer tube50 mm in length, 30 mm in heighth Four-bolt clam..
Alloy construction For 1 1/8" steerer tube15 degrees of rise; 120 mm in lengthFor 31.8 mm oversize h..
Alloy construction For 1 1/8" steerer tube15 degrees of rise; 120 mm in lengthFor 31.8 mm oversize h..
Alloy construction For 1 1/8" steerer tube15 degrees of rise; 105 mm in lengthFor 31.8 mm oversize h..
Alloy construction For 1 1/8" steerer tube15 degrees of rise; 105 mm in lengthFor 31.8 mm oversize h..
Alloy constructionFor 1 1/8" steerer tube40 degrees of rise, 90 mm in length For 25.4 mm handlebars ..
Alloy constructionFor 1 1/8" steerer tube40 degrees of rise, 90 mm in length For 25.4 mm handlebars ..
Alloy constructionFor 1 1/8" steerer tube15 degrees of rise; 60 mm in length For 25.4 mm handlebars ..
Alloy constructionFor 1 1/8" steerer tube15 degrees of rise; 60 mm in length For 25.4 mm handlebars ..
Alloy constructionFor 1 1/8" steerer tube25 degrees of rise, 110 mm in length For 25.4 mm handlebars..
Alloy constructionFor 1 1/8" steerer tube25 degrees of rise, 110 mm in length For 25.4 mm handlebars..
Alloy construction For 1" steerer tube-17 degrees of rise, 150 mm in length, 80mm extensionFor 22.2 ..
Alloy construction For 1" steerer tube-17 degrees of rise, 150 mm in length, 80mm extensionFor 22.2 ..
Alloy construction For 1" steerer tube-17 degrees of rise, 150 mm in length, 100mm extensionFor 22.2..
Alloy construction For 1" steerer tube-17 degrees of rise, 150 mm in length, 100mm extensionFor 22.2..
Used for assembling a 1" stem in a 1 1'8" head tube
90 mm in length
Aluminum cons..
Used for assembling a 1" stem in a 1 1'8" head tube
90 mm in length
Aluminum cons..
Used to combine 1 1/8" ahead stems with 1" threaded forks
150 mm in length
Alumin..
Used to combine 1 1/8" ahead stems with 1" threaded forks
150 mm in length
Alumin..
Showing 1 to 51 of 51 (1 Pages)
